general note irc reserves the right to make changes in product speci cation without notice or liability. all information is subject to irc s own data and is considered accurate at time of going to print. a subsidiary of tt electronics plc ?4222 south staples street ?corpus christi texas 78411 usa ? irc advanced film division telephone: 361 992 7900 ?facsimile: 361 992 3377 ?website: www.irctt.com mil-chip series issue june 2010 sheet 1 of 3 mil-chip series ? now quali? ed to mil-prf-55342 space level t ? seven industry standard sizes available ? mil-prf-55342 characteristics e, h, k, and m ? mil-prf-55342 extended reliability levels c, m, p, r, s and t precision military and space quali? ed chip resistors electrical data style size technology mil-prf-55342 characteristic tolerance resistance range ( ) rated power (mw) rated voltage* (v) reliability level termination type style 11 rm0402 thin film (tanfilm ? ) e, h, k, m 0.1% 100r - 30.0k 50 30 c, m, p, r, s type `b sn/pb solder over nickel barrier 1%, 2%, 5%, 10% 10r0 - 30.0k style 12 rm0603 thin film (tanfilm ? ) e, h, k, m 0.1% 100r - 59k 100 50 c, m, p, r, s, t 1%, 2%, 5%, 10% 10r0- 59k style 06 rm0705 thin film (tanfilm ? ) e, h, k, m 0.1% 100r - 125k 150 50 c, m, p, r, s, t 1%, 2%, 5%, 10% 10r0- 125k style 04 rm1505 thin film (tanfilm ? ) e, h, k, m 0.1% 100r - 125k 150 125 c, m, p, r, s, t 1%, 2%, 5%, 10% 10r0- 125k style 07 rm1206 thin film (tanfilm ? ) e, h, k, m 0.1% 100r - 125k 250 100 c, m, p, r, s, t 1%, 2%, 5%, 10% 10r0- 125k style 07 rm1206 thick film k, m 1%, 2%, 5%, 10% 1r00 - 10m 250 100 c, m, p, r, t style 08 rm2010 thick film k, m 1%, 2%, 5%, 10% 1r00 - 15m 800 150 style 09 rm2512 thick film k, m 1%, 2%, 5%, 10% 1r0 - 15m 1000 200 *note: voltage shall not exceed p x r.
mil-chip series issue june 2010 sheet 2 of 3 ?4222 south staples street ?corpus christi texas 78411 usa ? irc advanced film division telephone: 361 992 7900 ?facsimile: 361 992 3377 ?website: www.irctt.com precision military quali? ed chip resistors environmental data environmental test mil-prf-55342 thick film performance thin film performance mil-prf-55342 characteristic k typical irc r mil-prf-55342 characteristic h typical irc r thermal shock 0.5% 0.04% 0.25% 0.02% low temperature operation 0.25% 0.01% 0.25% 0.01% short-time overload 0.25% 0.03% 0.10% 0.01% high temperature exposure 0.5% 0.05% 0.50% 0.03% resistance to solder 0.25% 0.09% 0.25% 0.01% moisture resistance 0.5% 0.06% 0.40% 0.03% life 2.0% 0.10% 2.0% 0.03% l a w h b top side bottom lwh a b 0402 0.040 0.002 0.021 0.002 0.012 0.003 0.008 0.002 0.010 0.002 0603 0.063 0.004 0.031 0.004 0.020 0.004 0.008 0.004 0.008 0.004 0805 0.081 0.005 0.050 0.005 0.020 0.006 0.016 0.008 0.016 0.008 1505 0.155 0.007 0.050 0.005 0.025 0.003 0.015 0.008 0.015 0.008 1206 (thin film) 0.126 0.006 0.063 0.005 0.024 0.004 0.016 0.008 0.016 0.008 1206 (thick film) 0.126 0.008 0.063 0.005 0.024 0.004 0.020 +0.005/ -0.010 0.020 +0.005/ -0.010 2010 0.209 0.009 0.098 0.005 0.028 0.005 0.020 0.005 0.020 0.005 2512 0.259 0.009 0.124 0.005 0.028 0.005 0.020 0.005 0.020 0.005 physical data
mil-chip series issue june 2010 sheet 3 of 3 ?4222 south staples street ?corpus christi texas 78411 usa ? irc advanced film division telephone: 361 992 7900 ?facsimile: 361 992 3377 ?website: www.irctt.com precision military quali? ed chip resistors ordering data for performance speci? cation mil-prf-55342 d55342 h 07 b 1e00 s military designator m55342 for styles rm0402, rm0603, rm0705(0805), rm1505, rm2010, and rm2512 d55342 for style rm1206 characteristic e, h, k and m per mil-prf-55342 specification number 04 for style rm1505; 06 for style rm0705(0805); 07 for style rm1206 08 for style rm2010; 09 for style rm2512; 11 for style rm0402, 12 for style rm0603 termination termination b per mil-prf-55342 resistance and tolerance resistance and tolerance code per mil-prf-55342 product level designator product level c, m, p, r, s and t per mil-prf-55342 packaging standard order packaging is 8mm or 12mm tape per eia 481. conductive waf? e pack packaging is also available. for additional information or to discuss your speci? c requirements, please contact our applications team using the contact details below.
|
